Speed Controls R/C Set Servos Interface Videoh Audioh Other
View Cart

Now Accepting:

SSPS050 Serious R/C Servo

No Typical Use Links at This TimeCurrently UnavailableNot Available at This Time
SSPS050g.jpg (3970 bytes)
  • 690 oz in stall torque @ 8.4 VDC

  • 580 oz in stall torque @ 7.2 VDC

  • 480 oz in stall torque @ 6 VDC

  • 350 oz in stall torque @ 4.8 VDC

  • .3 sec > 60 deg @ 6 VDC

  • +-70 degree trav

  • 2.98 x 1.75 x 3.16", 10 oz

  • Ball bearings

  • Futaba Servo Command Pulse

With torque to spare!

ROBOTS: Real Wrist
Twistin' Power!

This rugged but small servo begins with a die cast metal case and builds from there.   It can accept up to 8.4 volts as power to achieve 690 oz in of stall torque.   The power has to come from somewhere so wire for peak currents of 4.5 amps @ 6 VDC.  The output shaft features double bearings for good life and has a 36 grove splined shaft allowing the included drive horn to be mounted in 10 degree increments.   Made by Tonegawa Seiko.
Note: Our products are not safety devices nor for use in life-critical or life support systems. Specifications and price subject to change without notice. Patented. Some trade names, trademarks & content owned by others.

Sales: (800) 882-6832

 Home Page

Contact Us

Copyright 1998-2011 VANTEC, All Rights Reserved
460 Honeycutt Dr.  Grants Pass, OR 97526
 Switchboard: (541) 471-7135
FAX: (541) 474-3987 
Enable JAVASCRIPT for best performance

Application Help Terms and Conditions Home Browse Catalog Testimonials Affiliates Manuals Repairs About Us Contact Us Top of Page Speed Controls R C Sets Servos Interface Videoh Audioh Other